• For filters operating less than 4000 hours per year: 12 months.
• For filters operating 8000 hours per year: 4000 hours or 6 months, whichever comes first.
7.10 Service kits
Service kits
For overhauling and for preventive maintenance, a wide range of service kits is available. Service kits
comprise all parts required for servicing the component and offer the benefits of genuine Atlas Copco parts
while keeping the maintenance budget low.
Also a full range of extensively tested lubricants, suitable for your specific needs is available to keep the
compressor in excellent condition.
Consult the Spare Parts List for part numbers.
7.11 Storage after installation
Procedure
Run the compressor regularly, e.g. twice a week, until warm.
If the compressor is going to be stored without running from time to time, protective
measures must be taken. Consult your supplier.
7.12 Disposal of used material
Used filters or any other used material (e.g. desiccant, lubricants, cleaning rags, machine parts, etc.) must
be disposed of in an environmentally friendly and safe manner, and in line with the local recommendations
and environmental legislation.
Be careful when removing the electric motor. The rotor contains magnetic parts.
Electronic components are subject to the EU Directive 2002/96/EC for Waste Electrical and Electronic
Equipment (WEEE). As such, these parts must not be disposed of at a municipal waste collection point.
Refer to local regulations for directions on how to dispose of this product in an environmental friendly
manner.
Instruction book
112
2920 7109 23