Procedure
Start from the Main screen (refer to
on page 33):
▪
Use the Scroll keys to move the cursor to Menu action button.
▪
Push the Enter key. The screen that follows is shown:
▪
Use the Scroll keys to move the cursor to the Info icon (refer to menu icon).
▪
Push the Enter key. The internet address is displayed on the screen.
4.15.
Week timer menu
Menu icon, Week timer
Function
▪
To programme time-based start/stop commands for the pump.
▪
To programme time-based change-over commands for the net pressure band.
▪
Four different week schemes can be programmed.
▪
A week cycle can be programmed. A week cycle is a sequence of 10 weeks.
For each week in the cycle, you can select one of the four programmed week
schemes.
Note:
In the controller you can select different timers on one day (up to eight
actions). It is not possible to programme two actions at the same time. Keep
minimum of 1 minute difference between each action.
For example, Start pump: 5.00 AM, Pressure setpoint 2: 5.01 AM (or later).
Procedure
Start from the Main screen (refer to
on page 33):
▪
Use the Scroll keys to move the cursor to Menu action button.
Elektronikon® graphic controller
07/2021 - ©Atlas Copco
Page 56
1950840208_A
