Atlas Copco BGB890301, Safety And Operating Instructions Manual

Page: 17 / 56

TRANSPORT
WARNING Hoist tipping over / hydraulic
attachment falling
The hydraulic attachment is heavy. The hoist/lifting
equipment and/or hydraulic attachment tipping over
or falling may cause serious injury and material
damage.
► Only transport the hydraulic attachment with lifting
equipment with the right load-bearing capacity for
the weight of the hydraulic attachment.
►
Only lift and secure the hydraulic attachment with
lifting gear (ropes, chains, shackles etc.) with the
right load-bearing capacity for the weight to be
lifted.
► Make sure that there is nobody near or under the
suspended hydraulic attachment.
♦ For transporting use only the adjustable eyebolts
with star profile keys (see table) as lifting lugs.
Standard eyebolts (DIN 580) are not permissible.
Max. load
weight [kg]
Adjustable
eyebolt/RUD
2
Weight
1
[kg] Model
750 VRS-F-M12 140 HC 150
750 VRS-F-M12 287 HC 350
750 VRS-F-M12 400 HC 450
1500 VRS-F-M16 828 HC 850
1500 VRS-F-M16 1044 HC 1050
1500 VRS-F-M16 1050 HC 1055
1
Hydraulic compactor without adapter plate
2
For more information and ordering visit supplier's web page:
http://www.rud.com
Transport using a crane
Adjustable eyebolt
A
A.
Star profile key
♦ Engage the star profile key in the hexagonal
socket screw.
♦ Screw in the two adjustable eyebolts by hand
diagonally to the connecting plate of the outer
housing.
♦ Disengage the star profile key again before
attaching the lifting gear. When firmly screwed in
with the star profile key disengaged, the ring body
must be able to rotate by 360°.
♦ Set the ring bodies in the direction of force, before
attaching the lifting gear. The adjustable eyebolts
are not designed for turning under load.
♦ Note the weight (see table).
♦
Attach ropes or chains to the adjustable eyebolts
as shown in the following illustration.
♦
Slowly lift the hydraulic attachment.
♦ Deposit the hydraulic attachment on level ground.
♦ After transporting, re-engage the star profile key
in the hexagonal socket screw.
♦ Unscrew the adjustable eyebolts again.
♦
Store the adjustable eyebolts in a safe place.
17 © 2014 Construction Tools EOOD | No. 3390 5121 01 | 2014-11-19
Original instructions
TRANSPORT HC 150, 350, 450, 850, 1050, 1055