OVERVIEW
Equipment description
The illustration gives an overview of the main parts
and components of the hydraulic attachment. Actual
details may differ.
A
B
C
D
E
F
G
A.
The hydraulic compactor is connected to the
carrier by the adapter plate. The
adapter plate
is not included in the scope of supply of the
hydraulic compactor.
B.
The
outer housing
protects the hydraulic
motor and the rotor housing. The adapter plate
is connected to the outer housing.
C.
The rotor runs inside the
rotor housing
.
D.
The
hydraulic motor
drives the rotor.
E.
The
tamper plate
is fitted to the rotor housing.
It transfers the force to the material to be
compacted.
F.
The rotor housing is suspended in the outer
housing through the rubber isolators. The
rubber isolators
dampen the impact force
being transferred to the carrier and the carrier
driver.
G.
The
rotating mechanism
(only HC 350 - HC
1055) enables the hydraulic compactor to be
rotated endlessly in a clockwise and/or
anticlockwise direction. The rotating
mechanism is not included in the scope of
supply of the hydraulic compactor.
Function
The hydraulic compactor compacts hard core
(granulate material), clay soil and organic soils. The
impact force is transferred to the ground by means
of the tamper plate working at a high frequency. Any
enclosed water and air are pressed out to compact
the ground.
Its construction enables the hydraulic compactor to
be used in trenches and on slopes where roll-type
compactors cannot be used.
The impact force of the hydraulic compactor can also
be used to drive sheeting, supports or uprights into
the ground.
Hydraulic compactors HC 350 to HC 1055 can be
rotated endlessly if they are fitted with rotating
mechanisms (optionally available).
The carrier driver activates the carrier function
»Rotate cutter«
. Oil is supplied to the hydraulic
motor of the rotating mechanism, causing the
hydraulic compactor to turn.
The endless rotation is enabled by a rotary
transmission.
Signs / labels
WARNING Missing warnings
The name plate and the labels on the hydraulic
attachment contain important information about the
hydraulic attachment and for personal safety. A
missing warning can lead to overlooking or
misinterpretation of possible risks and cause personal
hazards. The signs and labels must always be clearly
legible.
►
Immediately replace any defective name plates
and labels.
►
Use the spare parts list to order new name plates
and labels.
© 2014 Construction Tools EOOD | No. 3390 5121 01 | 2014-11-19
Original instructions
14
HC 150, 350, 450, 850, 1050, 1055
OVERVIEW
