4. Refit the drainage plug (A).
5. Unscrew the dipstick (D).
6. Fill with oil (C).
7. Refit the dipstick (D).
8. Start the engine and allow the engine to idle a
few minutes before increasing to full power.
Every 200 hours of operation
(monthly)
Maintenance routines:
♦
Check the engine speed.
♦
Check that the V-belt is not damaged.
♦
Change engine oil. See engine manual for more
information.
♦
Check and clean the spark plug. See engine
manual for more information.
♦
Clean the carburettor's fuel cock. See engine
manual for more information.
♦
Clean the silencer's spark catcher. See engine
manual for more information.
CAUTION Cover the V-belt
Running a machine without the protective cover over
the V-belt may cause trapping or machine damage,
which can cause injury.
►
Never run the machine without the protective cover
over the V-belt.
►
Stop the engine before removing the protective
cover.
Checking the V-belt
A correctly tensioned V-belt increases the life of the
V-belt and provides the best operating comfort.
1. Remove the protective cover (A).
A
2. Check if the V-belt (B) is damaged, change if
necessary.
B
C
D
D
3. If the V-belt is not correctly tensioned, adjust the
clutch wire (C).
4. Check the position of the V-belt in relation to the
pins (D).
5. Reinstall the protective cover (A).
21
© 2051 Construction Tools EOOD | No. 9800 1224 01b | 2051-05-18
Original instructions
Safety and operating instructions
BG 240 H4
