Technical data
Tool data
30 V d.c.
Motor voltage
70 W
Motor power
700 r/min
Free speed
Noise and vibration emission
dBA
Noise (in accordance with ISO15744)
<70
Sound pressure level
2
Sound power level
-
Uncertainty
m/s
2
Vibration total value, valid from 2010
(3-axes value in accordance with ISO28927-2)
<2.5
Vibration value
1.0
Uncertainty
Declarations
EC DECLARATION OF CONFORMITY
We,
Atlas Copco Industrial Technique AB
, S-105
23 STOCKHOLM, SWEDEN declare that the
product (with name, type and serial number, see front
page) is in conformity with the following Direct-
ive(s):
2006/42/EC, 2004/108/EC, 2006/95/EC
Harmonised standards applied:
EN 55014-1:2006+A1:2009, EN 61000-3-
2:2006+A1:2009+A2:2009, EN 61000-3-3:2008,
EN 55014-2:1997+A1:2001+A2:2008, EN 61000-
6-2:2005, EN 60745-1, EN 60745-2-2
Technical file available from:
Quality Manager, Atlas Copco Industrial Technique,
Stockholm, Sweden
Stockholm, 1 July 2013
Tobias Hahn, Managing Director
Signature of issuer
Noise and Vibration Declaration State-
ment
These declared values were obtained by laboratory
type testing in accordance with the stated standards
and are suitable for comparison with the declared
values of other tools tested in accordance with the
same standards. These declared values are not ad-
equate for use in risk assessments and values meas-
ured in individual work places may be higher. The
actual exposure values and risk of harm experienced
by an individual user are unique and depend upon
the way the user works, the workpiece and the
workstation design, as well upon the exposure time
and the physical condition of the user.
We,
Atlas Copco Industrial Technique AB
,
cannot be held liable for the consequences of using
the declared values, instead of values reflecting the
actual exposure, in an individual risk assessment in
a work place situation over which we have no con-
trol.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed. An EU guide
to managing hand-arm vibration can be found by
accessing http://www.pneurop.eu/index.php and se-
lecting 'Tools' then 'Legislation'.
We recommend a programme of health surveil-
lance to detect early symptoms which may relate to
noise or vibration exposure, so that management
procedures can be modified to help prevent future
impairment.
RoHS and WEEE
Information concerning
Restriction of Hazardous
Substances
(RoHS):
This product and its information, meets the require-
ments of the RoHS Directive (2011/65/EU).
Information concerning
Waste of Electrical and
Electronic Equipment
(WEEE):
This product and its information, meets the require-
ments of the WEEE Directive (2012/19/EU), and
must be handled according to the directive.
The product and/or its battery are marked with a
crossed trashcan, see figure below.
The symbol indicates that parts within the product
must be handled in accordance with the WEEE
Directive. These parts are indicated as “WEEE” in
the Spare part list, see under Remarks.
The entire product, or the WEEE parts, can be sent
to your “Customer Centre” for handling.
For more information, consult the website
http://www.atlascopco.com/.
Choose
Products
-
Links and downloads
, and click
EU RoHS and WEEE directives (ENGLISH only)
.
ESD certificate
The screwdriver with cable and drive has been tested
and approved by SP Swedish National Testing and
Research Institute for use in manufacturing of ESD-
sensitive devices. The ESD approved product fulfils
3
© Atlas Copco Industrial Technique AB - 9836 2880 00
Safety Information
EN
EBL35
