RETRO
2
Headphones
User manual
BXAUHBT2M
Technical information
Bluetooth:
5.0 and higher
Bluetooth profiles:
HFP, A2DP, AVRCP
Built-in microphone
Driver unit:
40 mm
Operation range:
10 m
Frequency range:
2.4-2.48GHz
Impedance:
32
Ω
Sensitivity:
105dB 3
Battery capacity:
400 mAh
Play time:
8-10 hours
Battery charging time:
1.5 hours
Weight:
109 g
Turn on/off the Retro headphones
Press and hold the multifunction button for 5 seconds.
Pair the Retro headphones with your smartphone
1. Turn on your mobile device Bluetooth.
2. Press the headphones multifunction button for 5 seconds to turn them on in paring
mode. The headphones LED indicator will flash blue and red.
3. Search for the headphones Bluetooth signal named “
Ksix_Retro
”. Pair with it.
When turned on, the headphones will automatically reconnect with last device they were
connected to. If you want to pair the headphones with a new device, previously you must
disconnect them from the device they are currently paire with it.
Charge the Retro headphones
When the headphones battery is low or empty charge it using the Micro USB port.
1. Connect the headphones to a power source using the Micro USB-USB cable. You can
connect them to a computer or a laptop USB port. If you connect them to a power outlet
you will need an adapter not supplied with this product.
2. When charging the headphones, the LED indicator will be red.
3. Once the battery is fully charged, the LED indicator will turn off.
Music Player management
You can control your mobile device music player using the buttons of the headphones.
•
Play/Pause the music player:
Press the multifunction button once.
•
Previous track:
Press the Volume down/Previous track button once.
•
Next track:
Press the Volume up/Next track button once.
•
Volume up:
Press and hold the Volume up/Next track button.
•
Volume down:
Press and hold the Volume down/Previous track button.
Phone calls management
Manage your phone calls using the headphones.
•
To answer/end an incoming call:
Press the multifunction button once.
•
To reject an incoming call:
Keep pressed the multifunction button for 2 seconds.
•
To re-dial the last phone call:
Double press the multifunction button.
Illustration
In the box
1 x pair of headphones
1 x Micro USB – USB cable
1 x 3.5mm audio jack cable
1 x user manual
LED indicator
Microphone
Aux in port
Card port
Micro USB charging port
Volume down / Previous track
Multifunction button
Volume up / Next track
M button
1
2
3
4
5
6
7
8
9
1
7
8
6
9
4
3
5
2
M
