1. Installa on Guidelines:
1.1 Loca ng the Machine:
1.2.1
Open the front door using the key provided. Remove all transit packing
and the installa on kit from the machine. Check for visual signs of damage which
may have occurred during transit. If the machine is damaged or any parts are
missing, you must contact authorised seller immediately.
1.1.1
The machine is suitable for indoor use only,
sited in an area with a recommended ambient
temperature not below 10° C and not exceeding
35° C. (image a)
(Image a)
1.1.2
Prior to moving the machine to its loca on, ensure
that there is sufficient access to ensure adequate
ven la on. 100 - 150 mm (4-6 inches) clearance must be
allowed between the back of the cabinet and the wall.
(Image b)
(Image b)
1.1.3
Ensure that the machine is situated on
a strong horizontal surface (See Specifica ons table),
at a convenient height and in a posi on where it is not
likely to be unstable. (Image c)
(Image c)
1.2 Installa on of Machine
1.2.2
The machine should be situated within one metre of
a drinking water supply from a rising main in case of pump.
Water Supply
by Jar
Water Supply
by RO
Plug
7
HOT BEVERAGE DISPENSER
1.2.3
Firstly break the seal of the potable drinking water
jar/source. Overturn the water bo le on top of the
machine carefully to avoid air lock/vacuum ven ng,
1. 2.4
Remove the plug while changing the jar.
