USER’S MANUAL
1.4.2 Programming of Atlan s 3/4 Lane:
The 3 and 4 lane machines are programmed in a very similar manner to the Atlan s 2 Lane.
The main differences have been highlighted.
1.4.3 Programming of Atlan s Select:
Black
Coffee
Café
La e
Cappuccino
Hot
Chocolate
Hot
Milk
Tea
Premix
STOP
Mochaccino
Image (B)
Image (C )
10
Press stop switch for 3 sec and machine will enter the programming mode.
Now screen will show “
SET DRINKS? : NO
” , Press
Key 1 (Black Coffee)
key for
YES
; Then it
will show message
Select Drink
on the screen.
Now select required Bev; Bev1, Bev2, Bev3, Bev4, Bev5, Bev6, Bev7 which se ng we want
to change by pressing their respec ve key.
Note: Programming of the AIRPRESS series dispensers
is same as the
regular café series dispensers, and can be done by holding your hand
in front of the sensors, just like you would press the bu ons on a
regular machine.
The five bu ons are named
BEV 1, BEV 2, BEV 3, BEV 4, STOP. BEV 1 and BEV 2
bu ons
does the same func on as the
COFFEE/TEA
bu on to increase/decrease me and toggle to
enable or disable func ons.
BEV 3
is the equivalent of the HALF bu on in the 2 lane Café
mini and is primarily for saving and moving on to next mode. In the Café Plus, to get hot
water or half cup, just press the STOP bu on once and then the BEV bu on of your choice
to get hot water/half cup of drink from that lane. A longer press of the STOP bu on and you
can enter the MENU mode and follow the same instruc ons as the Café Mini programming.
For example by selec ng Bev 1 it will show COFE WTR:06.00 which is the me for which
water from lane 1 is dispensed. This can be increased by pressing key 1 (Black Coffee) and
decreased by pressing key 2 (Coffee La e) and saved by key 3 (Cappuccino). Post saving the
display will show COFE PDR: 02.00 we can increase and decrease the coffee powder
quan ty as given above key 1 for increase and key 2 for decrease and save by key 3.
Post saving display will show COFE DLY: 02.00 here DLY stand for the providing a me delay
to powder from star ng of the water.
This powder delay can be increased and decreased as above.