Programming in Atlan s Micro
USER’S MANUAL
Your “DIAL A TASTE” beverage center comes at a default se ng for 70 ml cup size
change your cup size any me!
2. When you change your default cup size the quan ty of powder mix increases or
decreases propor onately to maintain beverage strength.
3. Increase of one point approximately increases water by 10 ml.
1. Set cup size by increasing or decreasing the ‘WATER’.
Your “DIAL A TASTE” beverage center comes at a default se ng for 12 gm. premix
change your beverage strength any me!
1. Set beverage strength by increasing or decreasing ‘PREMIX 1’ or
‘PREMIX 2’
2. When you change your beverage strength the quan ty of water does not increase
or decrease propor onately.
3. Increase of one point in beverage strength increases powder quan ty by
approximately 1.2 gm.
Your “DIAL A TASTE” beverage center comes at a default se ng for 70 ml cup size to
change your default cup size/beverage strength.
4. Wait for 3 seconds.
Now your default cup size/beverage strength is set.
3. Select default cup size by increasing or decreasing
increase in number
denotes higher cup capacity.
1. Press increase and decrease of ‘PREMIX1’ or ‘PREMIX2’ or ‘WATER’
together for 3 seconds un l you hear the beep.
2. Digit being programmed remains lit. Other digits blank out. Release bu ons.
For best results and to ensure smooth and uniform dispensing of beverage from the
machine, clean the canister elbows daily to remove premix powder that may have been
deposited in them.
12
