Atlantis Land A02-IPCAM3_ME01, Owner'S Manual

Page: 18 / 79

NetCamera NV
Chapter 3
Configuration
The NetCamera NV can be configured with your Web browser. The web browser is
included as a standard application in the following operation systems, UNIX, Linux,
Mac OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and
user-friendly interface for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that
communicate with theNetCamera NV, either to configure the device or for network
access. These PCs must have an Ethernet interface installed properly, be connected
to the Router either directly or through an external repeater hub, and have a fixed IP
address that must be in the same subnet of theNetCamera NV. The default IP address
of the NetCamera NV is 192.168.1.1 and subnet mask is 255.255.255.0.
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS Windows related manuals.
Any TCP/IP capable workstation can be used to communicate
with or through the NetCamera NV. To configure other types of
workstations, please consult the manufacturer’s documentation.