Atlantic AEYC-0639U-AT, Installation Manual

Page: 38 / 68

- 38 -
Line Function Setting range or display
Setting
increment
Basic
setting
800 S Start increasing the reduced operation -30... 10 °C 1 °C --
801 S End of increase in reduced operation -30... 10 °C 1 °C -5 °C
830 S Raising of mixing valve 0... 50 °C 1 °C 0 °C
834 S Servomotor travel time 30... 873 s 1 s 240 s
850 I Control of floor drying (
fig. 1 )
Off
0: O: Advanced stoppage of the programme running, programme not active
1: Heating functional.
2: Heating ready for occupation.
3: Functional h heating ready.
4: Heating ready + functional heating.
5: Manual: Manual mode enables you to program your own concrete slab drying time.
The function ends automatically after 25 days.
Respect the standards
and values of the building
constructor!
Correct operation of this
function is only possible with a
correct installation (hydraulic,
electricity and settings)!
The function may be interrupted
earlier by setting to "Stop".
50
45
40
35
30
20
25
55
X
0 1 5 10 18 1 5 7
1
25
Heating start temperature°C
Heating func Heating ready for occupation
Heating ready for occupation
Day
Functional
heating
fig. 1 - Diagram of the floor drying programmes
851 I Manual floor drying value (if line 850 = manual) 0... 95 °C 1 °C 25 °C
This function allows the customised floor drying temperature to be set. This temperature remains fixed.
The floor drying programme stops automatically after 25 days of operation.
856 I Current drying day 0... 32 0
857 I Drying days completed 0... 32 0
900
S
Switching of operation None, Protection mode,
Reduced, Comfort, Automatic
Reduced
Operating mode at the end of floor drying.
Cooling, Circuit 1 (Only available when parameter 5711 is set to "2-pipe system")
901 U Operating mode Protection, Automatic, Reduced,
Comfort
Protection
902 U Ambient comfort temperature value 17... 40 °C 0.5 °C 24 °C
903 U Reduced ambient temperature value 17... 40 °C 0.5 °C 26 °C
Aurea M / Installation / 1883 - EN