IP SIP Phone v2
User’s Guide
Mar. 2005
[68/100]
switch to the corresponding CNG-capable CODEC, even you have disabled “CNG”.
To configure Voice Activity Detection
a.
Press
【
】
FUNC +
【 】
# to activate menu.
b.
Go to submenu “8. Advanced” / ”3. CNG”.
c.
Configure to “Enable” or “Disable” silence suppression.
10.12. Registration on Demand
You can dictate the terminal to refresh registration immediately to all service domains by
pressing
【
Regis
】
tration . If you have gone offline (see-below), by pressing
【
】
Registration key, it will restart regular auto-registration scheduling as necessary too. During
registration, the corresponding green LED will flash. Based on the registration result, the LED will
have different indications:
Green LED
On: Successfully register to all activated service domains.
Red LED
On: At least one activated service domain could not be registered.
Green LED
Flashes: Registration is in progress.
Note,
IP SIP Phone
will regularly refresh
SIP Address-of-Record registration as necessary.
Red LED
Flashes: No activated service domains have ever registered successfully.
LED is off: Users explicitly logs out all SIP service and goes off-line ‘till user presses the
【
Registration
】
key again to go on-line (re-register to all SIP service).
I.
To can go off-line explicitly by:
z
From keypad (TELNET): going to
【
Main Menu
】
/
【
8.Advanced
】
/
【
3.System
Admin
】
and pick
【
1.Logout
】
.
z
From web browser:
Go to
『
IP SIP Phone
』
/
『
Advanced
』
/
『
System Admin
』
=> “Un-REGISTER”
to go offline.