manualshive.com logo in svg

ATL IP300S, User Manual, Page: 35 / 100

Share
Download
ATL IP300S User Manual Download Page 35

 

IP SIP Phone v2

 User’s Guide 

Mar. 2005 

 

[35/100]

digits on expiry as well. 

【 】

To speed up the dialing process, press  #  key whenever 

finishing dialing. 

z

 

User does not hook up yet: 

‹

 

The default inter-digit timeout is 4 seconds and the phone will dial out the collected 

【 】

digits either on timer expiry or user presses the pound,  # , key.   

z

 

If the call is made by speaker phone, it will return to IDLE state on call finish. 

 
The inter-digit timeout is configurable: 

z

 

To change it by TELNET or keypad, go to 

【

MENU

】

=> “5. Preferences” / “7. Dial 

Plan” / “1. Inter-Digit”. 

z

 

To configure it by web browser, go to 

『

Preferences

』

=> “Inter-Digit Timeout (s)” 

Please refer to section-10.7.1 “Inter-Digit Timeout” on this document for detail. 

 

【 】

To speed up the dialing process, press  #  key whenever finishing dialing. 

 

8.1.2. ENUM 

Sample 

1.

 

Configure your 

IP SIP Phone

 to use a NAPTR capable DNS server. If you use auto-locating 

SIP server instead of default outbound proxy for next hop delivery, your DNS must have SRV 
and A records like the following (please change those host and IP in red font accordingly): 

$ORIGIN SIP.isp.com 
;; Pref Weight Port Target 
_sip_udp.SIP.isp.com. IN SRV 0 0 1000 

proxy.sip.SIP.isp.com

. 

_sip._tcp.SIP.isp.com IN SRV 10 0 1000 

proxy.sip.SIP.isp.com.

 

proxy.sip.SIP.isp.com

 IN A 

192.168.192.99.

 

 
2.

 

Suppose you want to register your mobile number, +886-939342017 as an ENUM number 
associated with your SIP AoR, sip:[email protected]. Moreover, we assume that you 
configure your SIP phone to use the standard E.164 suffix for ENUM, “e164.arpa”, then you 
should add a NAPTR record under the domain “7.1.0.2.4.3.9.3.9.6.8.8.e164.arpa” (which is 
the reverse of your mobile phone number appended with “e164.arpa” suffix) like the 
following: 

$ORIGIN  7.1.0.2.4.3.9.3.9.6.8.8.e164.arpa 
;; order pref flags service regexp replacement 
IN NAPTR 100 10 "u" "

E2U+sip

"  "!^.*$!

sip:[email protected]

!" . 

Note: 

IP SIP Phone

 accepts both “sip+E2U” (RFC2916) and “E2U+sip” 

(draft-ietf-sipping-e164-04.txt) as NAPTR service strings. 

 

3.

 

The E.164 suffix for ENUM is configurable from menu-6.2.3 “ENUM & E.164”. 

Summary of Contents for IP300S





































































































Reviews:

No comments