IP SIP Phone v2
User’s Guide
Mar. 2005
[18/100]
PPPoE.
4.1.1.1. DHCP
z
Pick
【
1.Mode
】
\
【
1.DHCP
】
z
Disable
【
4.Use Static DNS
】
by choosing
【
2.DHCP
】
Note: if you want to assign a different domain name server instead of using those obtained by
DHCP, you should choose
【
1.Static DNS
】
and set the IP of your specific DNS into
【
5.Static DNS
】
, such as “1.Primary DNS” = 192.168.3.254
(
modify this as necessary)
.
The supported DHCP options are:
z
Client PC address
z
DHCP option 1—Client Subnet Mask
z
DHCP option 3—Gateway IP on the client’s subnet
z
DHCP option 6—One or two Domain Name servers
z
DHCP option 15—Domain name
z
DHCP option 42—Network Time Protocol servers
z
DHCP option 66 (TFTP server name)
Note: To make DHCP option 6 take effect, you must disable
【
MENU
】
=>
【
6.Network
】
/
【
1.General” /
【
4.Use static DNS
】
by picking
【
2.DHCP
】
Note: If DHCP option 42 is present, it will overwrite the SNTP server in menu-7.3.2
【
Server IP
】
Note: DHCP option 66 will overwrite the Auto-provision server in Menu-7.4.2
【
TFTP
server
】
4.1.1.2. Static IP (Fixed IP)
z
Pick
【
1.Mode
】
\
【
2.Static assign
】
z
Go to
【
2.Static Settings
】
, and enter your network configurations based on your ISP.
For example:
1.
Host IP = 210.201.210.132
(modify this as necessary)
2.
Network mask = 255.255.255.0
(modify this as necessary)
3.
Gateway IP = 210.201.210.128
(modify this as necessary)
z
Enable
【
4.Use Static DNS
】
by choosing
【
1.Static DNS
】
z
Assign
【
5.Static DNS
】
, such as:
【
1.Primary DNS
】
= “168.95.1.1”
(modify this as
necessary)
4.1.1.3. PPPoE
z
Pick
【
1.Mode
】
\
【
3.PPPoE
】
z
Go to
【
3.PPPoE settings
】
and enter your PPPoE authentication information, such as:
1.
Login ID = MyPPPoEAccount
(modify this as necessary)
2.
Password = PPPoEDialupPassword
(modify this as necessary)