Once the call has been established, the display will
appear as shown in the following example:
HR : MIN
DAY / MONTH
02920500700
00 - 02 - 36
CALL DURATION TIME
NUMBER DIALED
Making external calls from a Company exchange
(PABX) may require the number to be pre-
fi
xed by
an access digit, normally a “9”.
After a pre-de
fi
ned period called the “CALL TIMER
START” (See Section 12.6), the “CALL DURATION
TIME” is displayed (HR – MIN – SEC) and then
increments’ until the call is terminated.
To terminate the call, replace the handset or press
the “HEADSET/DIAL” key if the telephone is in
headset or handsfree mode.
USING THE ONE TOUCH MEMORY
To set up the ONE TOUCH MEMORY, (See Section
8.1).
Press the required “MEMORY LOCATION” key (M1
– M10).
VOLUME
M1
M2
M3
M4
M5
M6
M7
M8
M9
M10
DIRECTORY
CALLS
FOLLOW ON
MENU / ENTER
CANCEL
If the memory location contains previously stored
information, the LCD displays the stored information
as shown in the following example:
HR : MIN DAY / MONTH
02
CLOCK
123
MEMORY 02
MEMORY 02
INFORMATION
The number will self-dial in headset or handsfree
mode and the LCD will display the number called
and the call duration time.
HR : MIN
DAY / MONTH
123
00 - 01 - 10
CALL DURATION
TIME
NUMBER DIALED
To continue the call in handset mode simply lift the
handset.
The one touch memory may also be dialled after
lifting the handset or selecting the headset or
handsfree mode.
USING THE DIRECTORY
The directory is where a personal telephone,
(Number / Name) directory is stored. For setting up
this directory, (See Section 9.0).
Press the “DIRECTORY” key. The LCD will display
the 1st entry in the directory (i.e. Directory Location
01).In this example the number “02920500700” and
Name “ATL TELECOM” has previously been stored
in Directory Location 01.
01
ATL TELECOM
02920500700
NUMBER & NAME
PREVIOUSLY
STORED IN
DIRECTORY
LOCATION 01
DIRECTORY
LOCATION 01
HR : MIN DAY / MONTH
Either scroll through the directory using the UP (5) or
DOWN (6) key for the required number, or use the
keypad to search the directory for a stored name,
e.g. pressing key “5” once will bring up the
fi
rst name
stored, beginning with the letter “J”.
04
JOHN SMITH
02920500701
DIRECTORY 04
INFORMATION
4th ENTRY
HR : MIN DAY / MONTH
Pick up the handset or press the “HEADSET/DIAL”
key. The number will self dial in the selected mode
of operation.
Replace the handset or press the “HEADSET/DIAL
key” to terminate the call.
PAUSE TIME (SEC.)
Press the “MENU/ENTER” key again and the
“PAUSE TIME” Second will
fl
ash.
PAUSE TIME (SEC.)
1
CURRENT PAUSE
TIME FLASHES
Use the UP (5) or DOWN (6) key to step through the
available “PAUSE TIME” Period settings.Press the
“MENU/ENTER” key to con
fi
rm the PAUSE TIME
setting.
KEY TIME OUT
The period of inactivity, before unsaved entries are
cancelled can be selected between 500mS and
5000mS in steps of 250mS. The Factory Default is
set to 3000mS.
To set the KEY TIME OUT Period the Berkshire 800
must be “On-hook”.
Press the “MENU/ENTER” key. The LCD will display
“SET MEMORY”.
Press the UP (5) or DOWN (6) key until the display
shows “ADVANCED”.
Press the “MENU/ENTER” key, then press the UP
(5) or DOWN (6) key display until the display shows
“KEY TIME OUT”.
KEY TIME OUT
Press the “MENU/ENTER” key again and the “KEY
TIME OUT” period will
fl
ash.
KEY TIME OUT
3000
KEY TIME OUT
TIME PERIOD
FLASHES
Use the UP (5) or DOWN (6) key to step through the
available “KEY TIME OUT” Period settings.
Press the “MENU/ENTER” key to con
fi
rm the KEY
TIME OUT Period setting.
CALL TIMER START
The CALL TIMER START can be selected from 2,
5, 10 or 15 Seconds. The Factory Default is set to
10 Seconds.
To set the CALL TIMER START Period the Berkshire
800 must be “On-hook”.
Press the “MENU/ENTER” key. The LCD will display
“SET MEMORY”.
Press the UP (5) or DOWN (6) key until the display
shows “ADVANCED”.
Press the “MENU/ENTER” key, then press the UP
(5) or DOWN (6) key until the display shows “CALL
TIMER START”.
CALL TIMER START
Press the “MENU/ENTER” key again and the “CALL
TIMER START” period will
fl
ash.
CALL TIMER START
10
CALL TIMER
START SETTING
FLASHES
Use the UP (5) or DOWN (6) key to step through the
available “CALL TIMER START” Period settings.
Press the “MENU/ENTER” key to con
fi
rm the CALL
TIMER START Period setting.
FIRST RING DISABLE
The FIRST RING DISABLE can be enabled or
disabled. The Factory Default is “DISABLED”.
To set the FIRST RING DISABLE the Berkshire 800
must be “On-hook”.
Press the “MENU/ENTER” key. The LCD will display
“SET MEMORY”.
Press the UP (5) or DOWN (6) key until the display