24
ATIM_ACW-TCR_UG_EN_V1.0
Only codes 0x8A and 0x95 are followed by additional data corresponding to the battery level in millivolts. This value is
coded in two bytes, the most significant byte first (MSB).
Warning: for codes ranging from 0x81 to 0x92, the product will enter its FAULT mode and will no longer perform its
measurement function. For codes ranging from 0x93 to 0x9D, these correspond only to alarms, so the product
continues to operate normally.
0x99
ERR_SENSORS_TIMEOUT
A timeout has been reached out on the sensor
0x9A
ERR_SENSOR_STOP
The sensor did not report a value after reading
0x9B
ERR_SENSORS_FAIL
The sensor has stopped to operate
0x9C
ERR_BOX_OPENED
Casing opening
0x9D
ERR_BOX_CLOSED
Casing closing
