13
ATIM_ACW-TCR_UG_EN_V1.0
f.
Threshold exceeded
When thresholds have been configured using the configurator and the measurement values exceed these thresholds,
the product LED emits a periodic
ORANGE
flash to notify it.
g.
Anti-fraud system
A mechanism (push button) is present on the product to notify any opening of the case during normal operation.
Normally, the box exerts pressure on the button. As soon as the back cover is removed, the button is released,
triggering an alert. A light signal indicates that the opening of the case has been considered.
In addition, if the module is connected to a network, an alarm frame will be sent immediately when the box is opened
and then closed.
h.
Substitution to the magnet
You can use the push button on the ACW-TCR card to perform the same actions as the magnet (activate or standby
the product, activate / deactivate Bluetooth).
To do this, open the box and press the push button twice at the same time. A white flash indicates that the button
now acts as the magnet (
button pressed = magnet approached
, refer to the chapters
and
above to know how to use the button).
WARNING: Once the operations are complete, press the button twice again to restore it to its main function. A
white flash indicates that the manipulation was successful.
i.
Battery passivation
The ACW-TCR incorporates a battery depassivation feature, to limit the phenomenon of battery passivation during
prolonged phases of deep standby. This feature is automatically activated as soon as the product goes into its deep
sleep mode. The product will then wake up once a day to start the battery depassivation sequence, then the product
will automatically return to deep standby.
