MC DTC Series
– User manual
35 / 51
7.8.1 Resin area extraction
When printing with a YMCKO ribbon, the user can select area/features in an image to print with resin (K panel)
using the
Resin
Areas
extraction option.
Resin Areas
extraction user interface
Note:
Once the user has defined a resin area, this will always need to be removed or readjusted for a different card
layout.
Users can define resin area
location and area by
dragging the curser over the
image on the right side of the
user interface.
Users can define extraction
threshold for color to be
printed in resin by adding a
RGB value.
** Users can get the RGB
value of a feature by using
the Paintrapp.
Users can select
Dither
Area
o
option based on the
requirement.
Once area and threshold are defined the
user can add using the
Add
tab. The
added area can be removed by using the
Remove
tab.
Shows the
Defined
Areas
for resin
extraction. Once resin area is defined click
OK to proceed with print.
