MC DTC Series
– User manual
33 / 51
7.6 Laminator
The
Laminator
tab enables for the MC-L2 Inline laminator to be configured.
Note:
To use a laminator inline with the MC310, the user must select the output card path as the rear
outbin.
7.7 Color settings
By default, the
Brightness and Contrast
settings in printer properties show as
Automatic
.
To customize color printing select
Manual
from the drop-down menu, adjust Brightness, Contrast and Sharpness and
click
Apply
and
OK
.
Drop down menu for lamination
that includes options for film
detection, upper side lamination,
lower side lamination, pass
through and both sides.
Laminator parameter
adjustment option.
Work Mode
: this can be
Controlled
&
Standalone
.
To control the lamination parameters through
the XPS driver,
i
t should be set to
controlled mode
Tick the
Use
Laminator
option to
use a laminator in line with MC310
