Wireless F/T Installation and Operation Manual
Document #9620-05-Wireless FT-03
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati-ia.com • Email: [email protected]
57
7. Connect to the console, e.g. by pressing “Open” in PuTTy. Information will appear as the unit attempts
to connect to a wireless network.
8.
In the COMx – PuTTY Window type “d” and press Enter key.
9.
In the COMx – PuTTY Window type “t” and press Enter key. (Turns off the wireless connection on the
unit).
10.
Test that the unit is working by entering “IP” followed by the Enter key. This is the IP command, and
will present the current IP settings. Refer to the following example screen.
Figure 11.4—Test the Connection
11. Obtain the following information from your network administrator: IP Address to use for the unit, Subnet
Mask, Default Gateway, SSID, whether the Wi-Fi network operates on 2.4 or 5 gigahertz spectrum, IP
address of the computer you’re using to communicate with the unit.