Wireless F/T Installation and Operation Manual
Document #9620-05-Wireless FT-03
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati-ia.com • Email: [email protected]
46
7.
Troubleshooting
The system contains few components and provides trouble-free operation once properly installed. The following
table is provided to assist with troubleshooting the system.
Table 7.1
—Troubleshooting
Symptom
Possible Cause
Correction
Nonexistent
or intermittent
communication
Low battery power
Charge battery, (if battery does not retain a
charge replace battery).
Worn or damaged cabling
Inspect and test power supply and transducer
cabling and replace as needed.
External power adapter failing or
not functioning
Replace external power adapter
Obstruction between Wireless
F/T and wireless access point
Remove obstruction or reposition Wireless
F/T, or the wireless access point to obtain an
unobstructed environment
Wireless network component
failing or not functioning
Test components and replace as needed
Wireless F/T failing or not
functioning
Test Wireless F/T and replace as needed
Transducer not functioning
Refer to the F/T Installation and Operation manual
for troubleshooting information.
Wireless status
indicator is
flashing red
This typically happens when
trying to transmit to a UDP
address that does not exist
8. Serviceable Parts
Description
Part Number
Wireless F/T WNet-3
9105-WNET3
Wireless F/T WNet-6
9105-WNET6
Battery
5515-3.70000-01
External Battery Charger
9105-WNETEBC
Antenna
9105-WNETANT
Wireless F/T Power Supply, Wall Adapter Type
9105-WNETPS
USB A Male to USB B Male cable, 0.9m
9105-C-USAA-MINIB-0.9