ATI Technologies PROFINET DL10, Manual

Page: 47 / 59

Manual, Control Module, PROFINET, DL10
Document #9620-20-C-DL10-04
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: 919.772.0115 • Fax: 919.772.8259 •
www.ati-ia.com
C-47
8.
Specifications
Table 8.1
—DL10 Master Specifications
9121-DL10-M
PROFINET Master module with integrated Ethernet switch, D-Coded 4-Pin M12
connector for PROFINET communication, 5-Pin Mini Connector for US1 and US2
power, TSI on the Tool, Arc Prevention applied to US1 and US2 power. Lock,
Unlock, and RTL sensing with LED cables on the Master. Tool ID from the Tool
module also supported. Mates with DL10-T and DL15-T
Connector(s)
(1) 5-Pin male Mini-Fast Connector for auxiliary power
(1) 4-Pin female M12 D-Coded Connector for PROFINET
(4) 3-Pin female M8 Connector supporting Tool Changer Locked, Unlocked, and
Ready-to-Lock Proximity sensor in series
(1) 3-Pin female M8 Connector for Valve
Electrical
Rating
Power: 9 A
•
US1: 30 V max, if used with the DL10-T.
•
US1: 20.4 V to 27.6 V, if used with the DL15-T (limited by the safety
switch).
•
US2: 20.4 V to 29 V (limited by the valve) for DL10-T and DL15-T.
Note: The power source for input and output power must be capable of outputting
an operating voltage that is overcurrent protected and regulated.
Signal: 3 A, 30 VDC maximum
Current Draw
US1 Power: 220 mA @ 24 VDC: Master and Tool with Locked, RTL1, and RTL2
sensors “on” and Limit Switches/ TSI Circuits made, i.e. TSIV and TSRV “on”.
US2 Power: 250 mA @ 24 VDC (Solenoid Valve).
Enclosure IP65
Weight 2.23 lbs (1.01 kg)
Table 8.2
—DL10 Tool Specifications
9121-DL10-T
PROFINET Tool module provides one Ethernet port and supports Tool-ID through
the Master module. D-Coded 4-Pin M12 connector for PROFINET communication,
5-Pin Mini Connector for US1 and US2 power, 4-pin M12 connector for TSI switch,
Tool-ID 0-99999 adjustable with thumbwheel switches. Supports Arc Prevention on
the Master. Mates with DL10-M.
Connector(s)
(1) 5-Pin female Mini-Fast Connector for auxiliary power
(1) 4-Pin female M12 D-Coded Connector for PROFINET
(1) 4-Pin female M12 Connector for TSI
Electrical
Rating
US1+ and US2+ Power: 9 A, 12 to 30 VDC
Signal: 2 A, 30 VDC maximum
Tool-ID (5) Push-button switch reading 0–9 positions (00000-99999).
Enclosure IP65
Weight 1.42 lbs (0.64 kg)