44
TECHNICAL
SPECIFICATIONS
OPERATING LIMITS
Ambient Temperature
32°F to 140°F (0°C to 60°C)
Relative Humidity Tolerance
90%, Non-Condensing
Power
80 to 265 V, 50/60 Hz (Single-Phase); 120 to 375 Vdc; 24 Vac/dc (optional)
Power Consumption
Less than 6 VA
PERFORMANCE
Accuracy
±0.20% of Full Scale, (±0.10% Typical), ±1 Digit
Setpoint Resolution
1 Count / 0.1 Count
Repeatability
±1 Count
Temperature Stability
5 µV /°C (Maximum)
TC Cold-End Tracking
0.05°C /°C Ambient
Noise Rejection
>100 dB Common Mode, >70 dB Series Mode
Process Sampling
10 Hz (100 ms)
Digital Filtering
Adjustable 0.1 to 10
CONTROL CHARACTERISTICS
Setpoint Limits
Span of Sensor
Alarms
Adjustable for High/Low; Selectable for Process or Deviation
Proportional Band
2 to Span of Sensor
Integral
0 to 9600 Seconds
Derivative
0 to 2400 Seconds
Cycle Time
0.2 to 120 sec
Control Hysteresis
1 to Span of Sensor
Dead Band (Output 1&2)
Range of Sensor
Autotune
Operator Initiated from Front Panel
Manual Control
Operator Initiated from Front Panel
MECHANICAL CHARACTERISTICS
Display
Dual, 4-digit 0.36” (9.2 mm) LED display;
Process Value: Orange, Setpoint Value/Menu: Green
Numeric Range
-1999 to 9999
Front Panel Rating
NEMA 4X
Operating Temperature
32 to 140° F (0 to 60° C)
Humidity Conditions
90% R.H. max., non-condensing
Parameter Retention
Solid-state, non-volatile memory
Connections
Input and output via barrier strip with locking terminals
Contacts
Twin bifurcated
INPUT TYPE
Thermocouple
B, C, E, J, K, N, NIC, NNM, R, S, T, Platinel II, Maximum lead resistance
100 ohms for rated accuracy
RTD
Platinum 2- and 3-wire, 100 ohms at 0° C, DIN curve standard (0.00385),
1000 ohms available
Linear
0-50 mV/10-50 mV, 0-20 mA/4-20 mA, 0-10mV/0-50mV. 0-100 mV, 0-1V/
0-5V, 0-10 V, 1-5V
OUTPUT DEVICE
B
5 A /3A (120/240 Vac) relay, normally open.
C
5 A /3A (120/240 Vac) relay, normally open w/o snubber
D
0 - 7mA
E
0-20
mA
F
4-20 mA, full output to load with 500 ohm impedance max.
G
High impedance ‘F’ (800 ohms max.)
P
20 Vdc or 35mA
S
20 Vdc or 17mA.
T
1 A @ 120/240 Vac , solid-state relay
V
0 - 5 Vdc
X
0 - 10Vdc.
