22
DISPLAY MENU
Display
Parameter
Available Selections
Decimal point position
see note 1
to
- Use the
or to set the ‘resolution’ with the
location of the decimal point for linear inputs
to
- Use the
or to set the ‘resolution’ with the location
of the decimal point for thermocouple or RTD input.
Filtering
- Use the
or to set any fi ltering delays between 0.1
and 10 seconds.
Units -
see note 2
- Use the
or to select Fahrenheit scale
- Use the
or to select Celsius scale.
- Use the
or to select the Kelvin scale.
Blanking
Use the
or to set time, between 0.1 and 9999 seconds
before the setpoint display turns off.
How Do I Get Here?
1. Press for 3
seconds until menus
appear.
2. Press until
appears.
3. Press until
appears.
The SV display will
alternate between
the parameter and
its value.
4. Press or
to make selection
Note 1
- If you are
using a digital
RTD (
) for
your input, the
option will
not appear. This
parameter is set by
the type of input
.
Note 2
- If you are
using a linear input,
the
option will
not appear. This
parameter is set
and scaled by the
type of input
.
