® Urheberrecht ATH-Heinl GmbH & Co. KG, 2017, Alle Rechte vorbehalten. / Druckfehler und technische Änderungen vorbehalten / Stand: 01/2022
- 16 -
ALU-S balancing mode
Attention: Automatic selection of ALUS mode from DYN mode.
As the balancing machine is equipped with an automatic measuring gauge, the selection of ALUS mode is
simple and weight-saving.
1.
Enter the a1, d1, a2 and d2 values
-
Entering "a1 and d1" values: Pull out the gauge and place it on the first position FI (see fig.6) for
approx. 4 seconds, a1 and d1 values are automatically recorded and shown on the display.
-
Enter "a2 and d2" values: Pull out the gauge and place it on the second position FE (see fig.6) for
approx. 4 seconds, a2 and d2 values are automatically recorded and shown on the display.
fig.6
- Now the machine automatically switches to ALUS mode and the two LEDs in Fig.7 light up.
fig.7
