® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2018
- 26 -
3.
Choose of balancing mode
DYN
Dynamic
–
Mode (Standard):
This function determines the radial and lateral
runout of a light alloy or steel rim.
The balancing weights will be placed on the
outer and inner side of the clamped wheel.
STA
Static
–
Mode:
This function determines the radial runout of a
steel rim.
The balancing weights will be placed on a
central position of the rim.
ALU -1-
This function determines the radial and lateral
runout of a light alloy rim.
The balancing weights will be placed on
predefined points.
ALU -2-
This function determines the radial and lateral
runout of a light alloy rim. The balancing
weights will be placed on predefined points.
ALUS
This function determines the radial and lateral
runout of a light alloy rim.
The balancing weights will be placed on points,
predefined by the operator.
For balancing of light alloy rims, we are recommending the ALU S mode. This mode considers not
only the cross section of the rim but also helps at the exact positioning of the adhesive weight.
At ALU 1 there must be observed the following measurements while positioning the adhesive weights:
Summary of Contents for ATH W142
Page 1: ...USER S MANUAL ATH W142 ...
