® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2018
- 32 -
MAINTENANCE
Reparation works are only allowed to be done by authorized service partners or, after consulting ATH, by
the customer.
Before maintenance and reparation works the machine must be switched off from the power
supply. (Main switch off, disconnect plug). There must be taken measures against switching on.
Works on the electrical parts respectively the supply lines are only allowed to be done by skilled
personal/technicians.
Error and remedy
The wheel balancer can display the following errors:
Error
Reason
Err -1-
Err -2-
1. No tire on the balancer / to light tire on the balancer
2. Balancing shaft isn´t fix
3. Wheel is not fixed well on the shaft
4. Weak tension on the belt
Err -3-
To big unbalance
Err -4-
Damaged sensor
Incorrect rotation of wheel
Err -5-
Wheel guard not closed
Err -7-
Saved data´s were delete
Err -8-
Missed 100g weight
Damaged sensor
Damaged power or main board
Summary of Contents for ATH W142
Page 1: ...USER S MANUAL ATH W142 ...
