® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2018
- 14 -
Remove the fixing screws on the main shaft of
hood mechanism.
Place now the wheel guard on the main shaft and
fix by using the screw.
On the next step take the baffle and connect to the
above shaft.
Now fix it with the screw.
5.
Installation of the display
Fix the support of display by using the four
attached screws on the machine body.
Remove the top two screws of the cover to add
the cables into the cable canal.
Connect now the cables on the machine.
Fix the monitor on the support by using the
attached screws.
Connect the cables with the display.
At the end add again the both screws of the
cover.
6.
Installation of drive-on ramp
Summary of Contents for ATH W142
Page 1: ...USER S MANUAL ATH W142 ...
