® Copyright ATH-Heinl GmbH & Co. KG, 2019, All rights reserved / Misprints and technical changes reserved / As of: 2019-01
Manufacturer ATH-Heinl GmbH & CO.KG
- 31 -
4.3
Notes
Regardless of the level of dirt, the machine must be maintained, cleaned and serviced at
regular intervals.
The machine should then be treated with a care product (such as oil or wax spray).
Do not use cleaning agents that are harmful to the skin.
IF THE ABOVEMENTIONED POINTS ARE NOT FULFILLED, THE WARRANTY CLAIM IS
EXCLUDED
4.4
Maintenance or Service Plan
Interval
Im
m
ed
ia
te
ly
W
ee
kl
y
M
on
th
ly
Ev
er
y
3
m
on
th
s
Ev
er
y
6
m
on
th
s
Check of ALL safety-relevant parts
X
Cleaning
X
Check or restore surface protection
X
Check for leaks in the hydraulic system
X
Check or restore surface protection or corrosion protection
X
Check or restore damage to the paint and components
X
Check or restore rust damage
X
Check or treat cavities and non-painted areas
X
Check for leaks in the pneumatic system
X
Control the tightness of screws
X
Check, lubricate & adjust bearing slack
X
Check wear parts
X
Check fluids (level, wear, contamination, quality)
X
Check and lubricate sliding surfaces
X
Remove any dirt inside
X
Clean and check electrical components
X
Check motor and transmission for function and wear
X
Check welds and construction
X
Visual inspection (according to inspection plan)
X
