Chapter 3. Local Operation
23
Set Serial Port
To configure the VM1616T’s serial settings, select
Set Serial Port
from the
Menu.
The submenu provides four options:
Serial Port Address
;
Baud Rate
;
Serial
Port Mode
;
and
Default Serial Settings,
as follows:
Serial Port Address
To set the VM1616T’s serial port address, do the following:
1. Select
Serial Port Address
from the
Set Serial Port
submenu. The cursor
flashes on the entry:
2. Use the In
dial and turn it clockwise (ascending from 0, 1, 2 .... 15) or
counterclockwise (descending from 0, 15, 14.... 1) to select a number.
3. Press In/Out/Enter to confirm your selection.
Note:
The default serial port address is 0.
Set IP Port
Set Serial Port
Serial Port Address: 0
Baud Rate: 19200
