ATEN SN0108CO, User Manual, Page: 117 / 178

Chapter 8. Device Management
101
Network
The Network page is used to specify the network environment.
Each of the elements on this page is described in the sections that follow.
Note:
The
Enable Redundant NIC
option is only available for SN0108CO /
SN0116CO / SN0132CO / SN0148CO serial console servers.
IP Installer
The IP Installer is an external Windows-based utility for assigning IP addresses
to the Serial Console Server.
Click one of the radio buttons to select
Enable
,
View Only
, or
Disabled
for the
IP Installer utility. See
IP Installer
, page 152, for IP Installer details.
Note: 1. If you select
View Only
, you will be able to see the Serial Console
Server in the IP Installer’s Device List, but you will not be able to
change the IP address.
2. For security, we strongly recommend that you set this to
View Only
or
Disable
after each use.
Service Ports
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow. If a port other than the default is
used, users must specify the port number as part of the IP address when they
log in. If an invalid port number (or no port number) is specified, the Serial