5. Hotkey Operation
53
EDID Mode
To configure an EDID mode for the CS19208 / CS19216, do the following:
1. Invoke
HSM
with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press
[V]
.
3. Key in
[1]
,
[2]
,
[3]
, or
[4]
, the Function of [1], [2], [3], and [4] keys is
listed in the following table:
4. Press
[Enter]
. After pressing [Enter] you automatically exit
HSM
.
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke
HSM
with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press
[M]
.
This procedure is a toggle. Repeat to enable.
Note:
Enable mouse emulation to perform any independent switching of a port
and for Auto Scan Mode or Skip Mode to work.
Key
Description
1
Sets the switch to read
DisplayPort monitor’s EDID
(Default)
2
Sets the switch to read HDMI
monitor’s EDID
3
Sets the switch to ATEN default
EDID mode
4
Sets the switch to remix mode
Summary of Contents for CS19208
