ATEN CS17916, User Manual

Page: 48 / 86

CS1798 / CS17916 User Manual
38
(Continued from previous page.)
Setting Function
SCAN-SKIP
MODE Selects which computers will be accessed under skip mode
(see
F5: SKP , page 43), and Auto Scan mode (see F7: SCAN ,
page 44. Choices are:
ALL - All the ports which have been set accessible (see SET
ACCESSIBLE PORTS , page 39);
QUICK VIEW - Only those ports which have been set accessible
and have been selected as quick view ports (see SET QUICK
VIEW PORTS , page 41);
POWERED ON - Only those ports which have been set accessible
and are powered on;
QUICK VIEW + POWERED ON - Only those ports which have
been set accessible and have been selected as quick view ports
and are powered on. The default is ALL.
Note: The quick view choices only show up on the administrator's
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS , page 41). Enable mouse emulation for
scan-skip mode to work (see page 42).
SCREEN
BLANKER If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes, then press
[Enter] . The default setting of 0 disables this
function.
HOTKEY
COMMAND
MODE Enables / disables the hotkey command function in case a conflict
with programs running on the computers occurs.
HOTKEY Sets the keyboard shortcut for invoking Hotkey Mode (see Hotkey
Setting Mode , page 47). Choices are: NUM LOCK + - (minus)
(default), and CTRL + F12 .
OSD
LANGUAGE Sets the language used in the OSD. Choices are: English (default),
German, Japanese, Simplified Chinese, Traditional Chinese,
Spanish, French, and Russian.