ATEN CS17916, User Manual

Page: 17 / 86

1. Introduction
7
Components
Front View CS1798
No. Component Description
1 Port Selection
Pushbuttons For manual port selection (see Port Selection , page 30, also):
Š
Press a port selection pushbutton for less than two seconds to bring
the KVM, USB hub, and audio focus to the computer attached to its
corresponding port.
Š
Press a pushbutton for longer than two seconds to bring the KVM
and audio focus* to the computer attached to its corresponding port.
Š
Press pushbuttons 1 and 2 simultaneously for 2 seconds to start
Auto Scan Mode*. See
Auto Scan Mode , page 49, for details.
Š
Press pushbuttons 7 and 8 simultaneously for 2 seconds to perform
a keyboard and mouse reset. See
Keyboard / Mouse Reset ,
page 51, also
Note:
Enable mouse emulation for independent switching (see
page 42).
2 Port LEDs The Port LEDs are built into the Port Selection Switches. The left ones
are the KVM Port LEDs; the right ones are the USB LEDs:
KVM
Š
Lights DIM ORANGE to indicate that the computer attached to the
corresponding port is up and running (On Line).
Š
Flashes to indicate that Firmware Upgrade mode is in effect.
Š
Changes to BRIGHT ORANGE to indicate that the computer
attached to its corresponding port is the one that has the KVM focus
(Selected).
Š
Flashes to indicate that the computer attached to its corresponding
port is being accessed under Auto Scan mode.
USB
Š
Lights GREEN to indicate that the computer attached to its corre-
sponding port is the one that has access to the USB peripherals.
4
3
1 & 2
5 6 7 8