ATEN Altusen Hideaway KL9108M, User Manual, Page: 91 / 150

Chapter 6. The Windows Client
75
An explanation of the Hotkey Setup Actions is given in the table below:
Note: To invoke an action, you must press and release the keys one key at a
time.
If you find the default Hotkey combinations inconvenient, you can re-
configure them by following these five steps:
1. Highlight the Action, and then Click Start .
2. Key in the Function keys (one at a time). The key names appear in the Key
field as you press them.
3. When you have finished keying in your sequence, Click Stop .
(continues on next page)
Action Explanation
Exit remote location Breaks the connection to the KL9108 / KL9116 and returns
you to local operation.
Adjust Video Brings up the video adjustment utility.
Toggle OSD Toggles the OSD display Off and On.
Toggle mouse display If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this
function to shrink the non-functioning pointer down to a
barely-noticeable tiny circle - which can be ignored. Since this
function is a toggle - use the hotkeys again to bring the
mouse display back to its original configuration.
Adjust mouse This utility synchronizes the local and remote mouse
movements following a video resolution change. After
invoking this utility, simply click the local mouse pointer on top
of the remote mouse pointer.
Substitute Alt key Although all other keyboard input is captured and sent to the
KL9108 / KL9116, [Alt + Tab] and [Ctrl + Alt + Del] work on
your local computer. In order to implement their effects on the
remote system, another key may be substituted for the Alt
key. If you substitute the F12 key, for example, you would use
[F12 + Tab] and [Ctrl + F12 + Del].
Substitute Ctrl key If your local computer captures Ctrl key combinations,
preventing them from being sent to the remote system, you
can implement their effects on the remote system by
specifying a function key to substitute for the Ctrl key. If you
substitute the F11 key, for example, pressing [F11 + 5] would
appear to the remote system as [Ctrl + 5].