manualshive.com logo in svg

ATEN Altusen Hideaway KL9108M, User Manual, Page: 134 / 150

Share
Download
ATEN Altusen Hideaway KL9108M User Manual Download Page 134

KL9108 / KL9116 User Manual

118

Sun Systems

*

These solutions work for most common Sun VGA cards. If using them fails 
to resolve the problem, consult the Sun VGA card's manual.

Problem

Resolution

Video display problems with 
HDB-15 interface systems 
(e.g. Sun Blade 1000 servers).

The display resolution should be set to 1024 x 768.

Under Text Mode:

1. Go to 

OK mode

 and issue the following com-

mands:

setenv output-device 

screen:r1024x768x60 reset-all

Under XWindow:

1. Open a console and issue the following command:

m64config -res 1024x768x60

2. Log out.

3. Log in.

Video display problems with 
13W3 interface systems (e.g. 
Sun Ultra servers).*

The display resolution should be set to 1024 x 768.

Under Text Mode:

1. Go to 

OK mode

 and issue the following com-

mands:

setenv output-device 

screen:r1024x768x60 reset-all

Under XWindow:

1. Open a console and issue the following command:

ffbconfig -res 1024x768x60

2. Log out.

3. Log in.

Summary of Contents for Altusen Hideaway KL9108M























































































































































Reviews:

No comments