ATEN Altusen Hideaway KL9108M User Manual Download Page 115

Page: 115 / 150

Chapter 9. The Log Server

The Menu Bar

The Menu bar consists of four items:

Configure

Events

Options

Help

These are discussed in the sections that follow.

Note:

If the Menu Bar appears to be disabled, click in the KL9108 / KL9116
List window to enable it.

Configure

The Configure menu contains three items: Add, Edit, and Delete. They are used
to add new KL9108 / KL9116 units to the KL9108 / KL9116 List, edit the
information for units already on the list, or delete KL9108 / KL9116 units from
the list.

To add a KL9108 / KL9116 to the KL9108 / KL9116 List, click

Add

To edit or delete a listed KL9108 / KL9116, first select the one you want in
the KL9108 / KL9116 List window, then open this menu and click

Edit

Delete

When you choose

Add

Edit

, a dialog box, similar to the one below appears:

Summary of Contents for Altusen Hideaway KL9108M























































































































































Search results

Summary of Contents for Altusen Hideaway KL9108M

Reviews:

ATEN Altusen Hideaway KL9108M, User Manual, Page: 115 / 150

Search results

Summary of Contents for Altusen Hideaway KL9108M

Reviews: