manualshive.com logo in svg

ATEN Altusen Hideaway KL9108M, User Manual, Page: 22 / 150

Share
Download
ATEN Altusen Hideaway KL9108M User Manual Download Page 22

KL9108 / KL9116 User Manual

6

System Requirements

External Console

Š

A VGA, SVGA, or MultiSync monitor capable of displaying the highest 
resolution provided by any computer in the installation

Š

PS/2 keyboard and mouse

Computers

The following equipment must be installed on each computer:

Š

A VGA, SVGA or MultiSync video graphics card with an HDB-15 port

Note:

The integrated LCD monitor’s maximum resolution is 1280 x 1024 
@ 75Hz. Ensure that none of the computer resolution settings 
exceed the LCD monitor's maximum resolution.

Š

PS/2 mouse and keyboard ports (6-pin Mini-DIN)

Remote Computers

Š

For best results, computers that remotely access the KL9108 / KL9116 
should have at least a P III 1 GHz processor, with their screen resolution 
set to 1024 x 768.

Š

Users who want to access the KL9108 / KL9116 with the Windows Client 
must have DirectX 7.0 or higher installed.

If you don't already have it, DirectX is available for free download from 
Microsoft's Website: http://www.microsoft.com/downloads.

Š

Users who want to access the KL9108 / KL9116 with the Java Client must 
have Sun's Java 2 (1.4.2 or higher) runtime environment installed. Java is 
available for free download from the Sun Java Website: 
http://java.sun.com.

Š

Browsers must support 128-bit SSL encryption.

Š

For best results, a network transfer speed of at least 128 Kbps is 
recommended.

Summary of Contents for Altusen Hideaway KL9108M























































































































































Reviews:

No comments