Ateis Studio software
11
Then a IDA8C block will be created.
Step 5: system building-DSP compoment
Add a Tone component and connect it to the
Output component.
Double click the IDA8C icon to open the [IDA8C
DSP Configuration - IDA8C1].
Users can drag and drop the DSP components
which are listed on the left to the DSP
configuration window.
And start to design the internal signal paths for
each component via ''drag and drop''.
Element adjustment
Set the element of Tone Generator:
o
Level (dB) = -10
o
Tone Button = On
o
Tone freq. (Hz) = 2.00k
Now you can see the channel 1 meter and hear a
2k tone from the speaker connected to the
Amplifier Zone Output (zone1) on the rear panel of
the IDA8C.
Step 6: system building-compile and store
Compile and Store
