1. INTRODUCTION
This manual is an integral part of the machine and has to stay with it un
Ɵ
l it is taken out of service.
Read carefully each sec
Ɵ
on of this manual before using the machine. The manufacturer is not responsible for any damage
and/or injury caused by failure to follow the instruc
Ɵ
ons in this manual.
We also recommend:
x
Keeping the manual near the wheel balancer for easy access
x
Keeping the manual in a place protected from dirt
x
Not damaging the manual.
In the manual the following symbols are represented:
Indicates opera
Ɵ
ons that require special a
Ʃ
en
Ɵ
on
Indicates prohibi
Ɵ
ons
Indicates possible danger for the operator
2. INTENDED USE
This manual is an integral part of the product.
Carefully read the warnings and instruc
Ɵ
ons contained in this manual as they provide important informa
Ɵ
on about SAFE
USE and MAINTENANCE.
KEEP THIS HANDBOOK NEAR THE MACHINE FOR CONSULTATION BY THE OPERATOR
3. GENERAL SAFETY RULES
The wheel balancer must be used exclusively for the purpose for which it has been designed.
Any other use is considered INCORRECT and UNREASONABLE.
The wheel balancer may be used by authorized, trained personnel only.
Do not put any objects in the base which may a
ī
ect the correct opera
Ɵ
on of the wheel balancer.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE TO PEOPLE OR PROPERTY
CAUSED BY UNAUTHORIZED PERSONNEL OR IMPROPER, INCORRECT AND
UNREASONABLE USE OF THE WHEEL BALANCER.
THE WHEEL BALANCER SHOULD NOT BE MODIFIED OR TAMPERED WITH WITHOUT THE
MANUFACTURER'S PERMISSION. ANY UNAUTHORIZED CHANGE MADE TO THE
EQUIPMENT RELIEVES THE MANUFACTURER FROM ANY LIABILITY IN CASE OF DAMAGE
ATTRIBUTABLE TO SUCH ALTERATIONS.
This wheel balancer has been made to balance wheels for automobiles, light trucks and SUV’s (CAR) and Motorcycles (MOT).
This machine works on wheels with diameters from 10” to 24” (254 to 610mm) and widths from 1.5” to 20” (38 to 508mm).
All func
Ɵ
ons and controls can be set with the keys on the control panel and the data is displayed on the LED display.
3
