13.3 Flange Disk Posi
Ɵ
oning (Op
Ɵ
onal)
hƐĞĚŽŶƟƌĞĂƐƐĞŵďůŝĞƐǁŝƚŚůĂƌŐĞĐĞŶƚĞƌŚŽůĞƐŝŶƚŚĞƌŝŵ͘
Main sha
Ō
Ň
ange disk (
Į
xed on the main sha
Ō
) wheel
cone
quick nut
NOTE:
The choice of the cone should be dependant on the rim
ĐĞŶƚĞƌŚŽůĞ͘WĂLJĂƩĞŶƟŽŶƚŽŝƚ͛ƐĚŝƌĞĐƟŽŶ͕Žƌŝƚ
will cause an inaccurate measurement.
14. INPUT MACHINE THREE PARAMETERS
14.1 Input DIS (Distance) Value
Pull the scale to the inner posi
Ɵ
on to add the weight and press the key
to input the DIS value
into the display. Once inputed, the display will
show [DIS]: [XXX], the default system is mm.
14.2 Input Br (RIM Breadth) Value
Use the Br measurement caliper to measure the Br of the rim, press the key
to input the Br value
into the display. Once inputed, the display will display [Br.]: [XXX],
the default system is inch.
14.3 Input the DIA (Diameter) Value
A
Ō
er con
Į
rming the rim diameter, press the key
to input the rim diameter into the display. Once
inputed, the display will display [Dia ]: [XXX], the default system is mm.
13
