18 RESIDUAL IMBALANCE VALUE DISPLAY
The minimum value of the standard weight is 5g so if the weight you use is less than 5g, the wheel balancer will not
display the value and only displays the state of “00”. When you need to display the residual unbalance value, you should
press
key and the display will immediately display the inside or outside unbalance value of less than 5g. The
maximum residual unbalance value is 4g.
19. BALANCE MODE SELECTIONS
Press the corresponding
key to choose the balance mode. If all the lights do not light up, it is
in dynamic mode.
DYNAMIC
— Clip the weights on both sides of rim.
STATIC
— S
Ɵ
ck the weight in the center.
MOT
— Op
Ɵ
on for balancing motorcycle rims.
When balancing motorcycle wheels, you will require the (op
Ɵ
onal) motorcycle adaptor accessory MJ-II. With the
assistance of the extension scale to measure distance, Br and diameter value. Input the value into the Di, Br and Di
display window. The input method is the same as the parameter input of the car
.
ALU1
ˉ
To balance light aluminium alloy rim
Ɛ͕ƐƟĐŬ
the weight on the shoulders of the rim.
ALU1
15
