12. CONTROL PANEL
The machine control panel is shown in FIG.008. The control panel allows the operator to give commands and enter or
edit data. The same control panel displays the machine balancing results and messages.
1. This parameter input, is the distance from wheel to balancer input key .You can change
the distance set value by pressing the up/down key.
2. Br value input key. You can change the Br set value by pressing the up/down key.
3. This parameter input, it is the diameter
input key. You can change the diameter
set value by
pressing the up/down key.
4. High accuracy balance key: When the display displays [000], press this key and the display will display
the unbalance value
less than 0.25 Oz.
5. Unit conversion key can convert the unit of measure for the unbalance, size and weight values.
6. Balancing mode selec
Ɵ
on keys.
7. Func
Ɵ
on & con
Į
rm key (Home Key)
.
FIG.008
10