PiezoClamping
Calibration Kit
Page 8 of 14
5.
Technical specifications and elements identification
5.1. Technical specifications
Range
Electrical charge .................................................... 5.50 - 22.00 µC
Accuracy .............................................................. ± 5 %
Precision .............................................................. ± 0.05 %
Setting parameters
Electrical charge .................................................... 5.50, 11.0, 16.50 and 22.00 µC
Other specifications
Electrical shock protection ...................................... Class I
Protection level IP ................................................. IP40
Battery run time ................................................... 40 hours
Charger DC input .................................................. 5 VDC / 0.5 A
Equipment dimensions (W x L x H) .......................... 70 x 62 x 50 mm
Equipment weight without packaging ........................ 85 g
Working temperature range ..................................... From -10 to +45 °C
5.2. Elements identification
[1] ON/OFF toggle switch
Switch to turn the equipment ON and OFF.
[2] Charge selector push button
Press and hold briefly to change the charge
selection.
[3] OUT/CHARGE toggle switch
Switch the internal capacitor between
“CHARGE”
and
the BNC connector “OUT”
.
[4]
BNC connector “OUT”
Connect the PiezoClamping
here using a BNC-
BNC cable.
[5] LEDs
Indicates the selected charge.
[6] USB charger entry
Connect to a cell phone charger (5VDC/0.5A)
to charge the internal battery.
[7] TAGs
Code, model and serial number.