AT-320 H323 Phone User Manual (V1.39)
38
the SDRAM of the phone. Then the file can be read by PalmTool. This
operation aims at testing.
X-1: Connect to FTP Server to get the file of updating program and update
program Flash. This operation aims at updating program.
X-2: Connect to FTP Server to get the file of updating dial rules and update
program Flash. This operation aims at updating dial rule.
Note
When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too large
or the net speed is too slow, then the process will not be seen in telnet window.
Please be patient. Using ftp command in telnet to get file spends almost same
minutes as getting file using phone. So if nothing is displayed after too long time, it
means that ftp is fail.
Note
All the Telnet commands of AT-320 IP phone should be written in low case and
the password is case sensitive.
¾
Upgrade AT-320 IP phone
¾
Set FTP server
FTP server can be supplied by the server provider as well as setup by the users in
LAN. Please set the IP address of FTP server.
¾
Prepare Updated program
You can ask the server provider for the latest version of program.
¾
Operation
If you have got the IP address of the FTP server from ISP, please do as follows:
a)
Use keypad to enter setting mode
b)
Use keypad to input the IP address of FTP server
c)
Press , then No19 light will blink twice a second. Once the
phone restarts successfully, the new program is effective.
Note
Please do not change the name of the upgraded program, or the
8
Local IP
