AT-320 H323 Phone User Manual (V1.39)
39
operation will be fail.
¾
Usage of the phone
¾
Receiving calls:
AT-320 IP phone can receive incoming calls from other AT-320 IP phone and
devices that support the H.323 protocol. It works just like an ordinary phone for
incoming calls. When it rings, you can receive the call by following methods:
Use handset: Lift the handset and begin speaking. When the call is over, put
the handset back.
Handset to hand free: While receiving call with handset, press
on the keypad and then put down the handset. When the call is over, press
again.
Hand free: Press to speak to the other party. When the call is over,
press again.
Hand free to handset: While receiving the call with pressed
, pick up the handset to continue the call. When the call is over, put back the
handset.
Note
When you communicate with the other party without lifting the handset, please
do not exceed 40 CM from speaker.
¾
Place a call
●
Call another PA168 IP phone under the same Gatekeeper:
1.
Handset: Pick up the handset and listen for the Internet dial tone. Then dial the
phone number you wish to call and press or to end the dialing.
Speaker
Speaker
Speaker
Speaker
Speaker
Call
