AT-320 H323 Phone User Manual (V1.39)
10
Fig 3.2 Network Setting
●
iptype
: Set how IP phone gets relevant network parameters by selecting
corresponding item from drop down list.
static ip
: Select this item to authorize users set IP address, subnet mask and
router IP address of IP phone manually.
dhcp
: Select this item to enable DHCP mode. With this system, your LAN or
router automatically assigns all the required network parameters to any device
connected to it when the device log on. AT-320 IP phone is shipped from the
factory with DHCP on. So, if you’re LAN or router is configured to use DHCP
addressing, the IP phone’s LAN parameters will automatically be configured as
soon as it is connected to the LAN or router and powered up.
pppoe
Those ADSL and Cable Modem users please select this item for it is a
protocol especially designed for them. With this system, ADSL ISP
automatically assigns all the required IP parameters to any device connected to
it when the device log on.
modem
If the IP phone used with modem, please select this item to get
relevant network parameters auto. Then please fill ID and pin into ppp id and
ppppin fields.
●
ppp id:
With
pppoe
or
modem
selected in
iptype
drop down list, please enter
the user name here.
