Atari XMM801, Field Service Manual, Page: 48 / 49

4) After fix the M2.5x6 screw firmly, check once
more the location of left end of printed
character which is within the specification.
5. Replacement and Adjustment of paper End Sensor
5-1 Disassemble and assemble
1) Take out the Leaf Switch Ass'y and M2.3x5 screw
by loosing the screw as shown below.
2) P-G Lever also is removed accordingly with the
Leaf Switch Ass'y.
3) Resolder the lead wires from Leaf Switch
terminal.
4) In case of assembling, do reverse way of 3), 2),
1).
5-2 Adjustment of Paper End Sensor
1) With holding the P-G Lever against the Platain,
check the gap between P-G Lever and the tip of
Leaf Switch which is within 0.05~0.15mm by
inserting Thickness Gauge.
And if not, adjust the Leaf Switch Ass'y, then
fix the M2.3x6 screw firmly.
-43-