3.
Monitor will not lock onto the signal and provide a stable picture, colors are missing, etc.
A:
Check connectors and cables for wiring continuity from the CPU Board to the Video Monitor.
B: Ensure that the Video Monitor Assembly is correct for this game. Use of video monitors with
different resolution will result in what appears to be horizontal tearing or complete loss of sync.
C: Verify that the Video Monitor is operating correctly by placing it in a known good unit.
4:
Game operates normally, but video picture wavers or rolls, has dark bars, uneven colors, etc.
A:
Check connectors and cables for wiring continuity from the CPU Board to the Video Monitor.
B:
Ensure that all the cabinet ground wires are connected, especially at the Video Monitor Chassis.
C: Move the cabinet farther away from machines, appliances, other games, etc. Very strong
electrical or magnetic fields are emitted from some equipment when it is operating normally.
D: Verify that the Video Monitor is operating correctly by placing it in a known good unit.
MISCELLANEOUS
1:
Marquee lamp is intermittant or non-functional. Game starts and plays normally.
A:
Open the marquee and remove the glass.
Remove the plastic lamp locks and the fluorescent
tube from the holders. Install
a new lamp
if cracks or darkened ends are found. Clean the tube.
B:
Verify that the lamp and starter pins are making good connection with their socket contacts.
C:
Measure the Fluorescent Lamp Assembly A.C. voltages (Power Wiring Diagram, Section Three).
Check wiring and connector continuity from the A.C. Power Chassis to the Lamp Assembly.
D:
Ensure that the Fluorescent Lamp Ballast is rated for the local A.C. line voltage and frequency.
E:
Check for continuity of both fluorescent lamp filaments, the starter, and the ballast. One at a time,
verify that the lamp, starter, and ballast operate by placing each in a known good unit.
2.
Game operates normally, but cabinet gets very warm after several hours of use.
A:
Check
bottom and rear of cabinet for blocked air flow. Move game away from sources of heat.
B:
Turn OFF the game power. Apply high power vacuum cleaner to vent holes to remove dust.
C: Unlock and remove
rear door. Ensure that all fans are connected and operating.
3.
Error Messages appear on the screen. The game does not start and there is no audio.
A: Check any assembly (RAM,
ROM,
Battery, etc.) identified
in the Error Messasge.
Call your authorized distributor for help with unresolved screen messages.
Summary of Contents for RAMPAGE WORLD TOUR
Page 41: ...CABINET WIRING DIAGRAM 3 4 ...
